Kernel Cob Blaster | Log Splines | Peel Away 7 | Sapstain Controls: PQ-80 StaBrite Timber-Tec | Snorkler   Save time and money removing finishes from logs the earth friendly way without harsh chemicals or messy liquids. Complete with instruction manual, all parts, and hoses needed to operate machine. (Media not included).Cobblasting is an innovative new way of stripping logs by using "grit-o-cobs" (dried corn cobs), instead of sand. Cobblasting is less abrasive than using sand and can be used as mulch for a garden or around plants when the job is done (if the stripped finish doesn't contain any lead). Typically with sandblasting the sand has to be hauled away adding extra expense. Cobblasting won't pit the logs the way that sandblasting will (a light sanding is all that is required so that absorption of stain is more uniform) and so you can save time and expense by not having to sand the logs down so heavily. See Custom Features, Equipment, and Tips on Using The Kernel Machine and Abrasive Blasting. TI90-22500 Price $$4,426.34 Includes Fan Nozzle Grit-o-cobs Cob Media is available, for current pricing Just Ask! 1-800-359-6614  Log Splines Newell's log spline is the finest weather sealing system on the market. Three applications:  Between Logs Between the Ends of Logs Between the Wall and Window, and Door Jambs.The system offers quick and easy installation. The all-vinyl flange system provides superior sealing against the elements. Unique heavy-duty performance design is the key to the success of this product. 8' lengths. Case lots only.
 The PEEL-AWAY 7 System is an environmentally safe paint remover that has been specifically formulated to remove high strength chemically resistant coatings i.e. epoxies, urethanes, chlorinated rubber, elastomeric, aluminum, vinyls, mastics, automobile paints and most marine coatings. There is NO methylene chloride nor caustic or any other highly flammable solvent in the product. The chemicals in PEEL-AWAY 7 have been selected for their very low evaporation rate which means in some cases you will have to give the product more time to work then with some of the more aggressive chemical products but the end result will be the same. PEEL-AWAY 7 contains no water and in most cases will do the removal job in a single application. The product can be used with or without the PEEL-AWAY fibrous laminated cloth and that decision depends on testing that is done prior to specifying the product. PEEL-AWAY 7 is a paste that is either brushed, rolled or sprayed over the surface to be stripped. It is allowed to set for the time frame that is predetermined by the test areas and then is either scraped or power washed from the surface. Does Not Contain Methylene Chloride Or Caustic. For current pricing Just Ask! 1-800-359-6614 See Specs and Data. PQ-80 is an effective, water-soluble fungicide concentrate formulation with a mild scent containing Copper-8-Quinolinolate (Oxine Copper) for the control of sapstain and mold on both hardwoods and softwoods. PQ-80 is also suitable for canvas and other textiles, rope and nets, and paper products. PQ-80 may be applied by spraying, dipping, or electrostatic deposition on fresh cut lumber for sapstain control. PQ-80 is compatible with commonly used insecticides. For Industrial Use Only. The active ingredient in PQ-80, copper-8-quinolinolate, is allowed by the FDA as a preservative for wooden articles used in transporting, packaging or holding agricultural products. Freshly cut wood should be treated as soon as possible and definitely within 48 hours. Otherwise fungal attack may extend below the surface of the wood, beyond the reach of a surface fungicide treatment. Remove sawdust and other debris from application apparatus daily to maintain solution effectiveness. Freshly treated lumber should be protected from rain. Application Techniques - the most common method of applying anti-stain chemicals is a dip immersion. Experience has proven that an immersion of a single board for a short duration (approximately ten seconds) in a properly maintained solution at the dilution rate of 1 gallon PQ-80 per 200 gallons of water will control stain and mold under moderate staining conditions. Dipping complete packages of lumber will normally require 30 seconds to three minutes for immersion. All surfaces should be treated in order to ensure control. As a rule of thumb, remove bundles when air bubbles stop coming from between the layers of boards. Dip times can be reduced by placing the lumber on an angle with the surface of the dip solution as it is immersed. Typical Use Rates - dilution rates will depend on biological stress, temperature, humidity, species, and application method. Less active ingredient is needed per board foot when climate is cool and control for short-term periods desired. Increased solution concentrations should be used when stress level is high or to minimize sapstain in fresh-cut lumber. Smooth surfaced lumber normally retains 30% to 50% less fungicide solution as rough cut wood and needs a stronger concentration to deposit the necessary amount of fungicide on the wood. 5 gal (makes 1000 gallons @ 200:1) $439.00 Order 2 or more pails and get free shipping! Ships By Truck Only See also PeneTreat We also Carry Sansin Timber-Tec for Sapstain Control Click for Info  StaBrite P is a liquid concentrate of 3-lodo-2-Propynl Butyl Carbamate which readily mixes with various diluents to form a preservative solution. Wood products for use in the particle board production process may be protected from sapstain and mold by the same treating processes recommended for freshly cut lumber and timber. Sta Brite P is supplied as a concentrate and lends itself to automatic metering and dilution with water using either the Sure-Mix or dispenser system, or by simply hand mixing, and then may be applied to wood products by dip, spray, or flow coat. Typically, manual procedures are used when Sta Brite P is mixed with petroleum solvents.For Stain and Mold Control On Freshly Cut Lumber and Timbers Freshly cut wood should be treated within 24 hours. Otherwise, fungal attack may extend below the surface of the wood beyond the reach of a surface fungicide treatment. Remove sawdust and other debris from the application apparatus daily to maintain solution effectiveness. Freshly treated lumber should be protected from rain. Base Strength For lumber 2 inches or less in thickness, one gallon of Sta Brite P is combined with 200 gallons of water. Under average conditions, a Base Strength solution provides fungus control when applied to rough cut wood, provided drying, storage and shipment are carried out in accordance with optimum industry standards, at these rates: 10 gallons on 8/4 cut per 1000 board feet 15 gallons on 6/4 cut per 1000 board feet 20 gallons on 4/4 cut per 1000 board feet Stronger Than Base Strength Stronger solutions are needed for lumber thicker than 2 inches, for tightly bundled lumber, surfaced wood and for prolonged exposure to adverse conditions, such as high humidity or frequent rain, or when ultra low volume applicators are used to apply the solution. These higher-than-Base Strength solutions usually are in the range of one gallon of Sta Brite P diluted with 50 to 100 gallons of water. Surfaced lumber normally retains only one-half as much fungicide solution as rough cut wood and hence needs a concentration of double the Base Strength to deposit the necessary amount of fungicide on the wood. For Millwork and Other Wood Used Above Ground For windows, window frames, doors, stairs, porches, shingles, trellises, steps, interior trim, wall paneling, furniture, fence pickets, fence rails, furring strips, arbors, flooring, and beverage cases:Sta Brite P may be diluted with water or mineral spirits before use. Dilute 1 part Sta Brite P with 10 parts of water or 1 gallon of Sta Brite P with 15 gallons of mineral spirits or equivalent solvent. Mild agitation is necessary during the dilution process. The best results will be obtained if wood to be treated is immersed for 3 minutes or longer. If dipping is not possible, 2 liberal brush or spray applications can be applied. Allow at least 1 hour between applications. Make certain all surfaces are fully treated to obtain the maximum benefits. Allow 24 hours or longer after application of the preservative before painting or until all carrier (water or mineral spirits) has evaporated. Less paint is needed over wood treated with this water repellent wood preservative. For General Preservation Of Wood In Ground Contact Sta Brite P may be diluted in water or a suitable petroleum solvent such as mineral spirits, diesel fuel, or solvents conforming to AWPA* Standard P-9, for use in protecting wood from decay under conditions of high decay hazard. Dilute 1 part Sta Brite P with 10 parts water or 1 gallon of Sta Brite P with 15 gallons of petroleum solvent. After dilution the Sta Brite P can be applied to lumber, posts, poles and other wood products by soaking, spraying or brushing. The degree of protection is directly related to the amount of Sta Brite P retained in the wood. Soaking will result in higher levels of retention than brushing or spraying and should be used when possible. Fence posts should be debarked and air seasoned until dry and then soaked 24 to 48 hours. The butts should be well treated. Lumber for steps, sills, etc. should be soaked for at least 12 hours. When wood is not to be used in ground contact brushing or swabbing may be used. The joints should be thoroughly treated. Commercial wood treating establishments may apply ready-to-use solutions of Sta Brite P by pressure treatment according to methods described by AWPA. For supplemental protection against insect attack, admix appropriately labeled, EPA registered insecticides to the ready-to-use Sta Brite P solutions. Follow the directions given on the insecticide product label. 5 gal (makes 250 gallons @ 50:1) $383.75 Ships By Truck Only
To Place an Order: Call Toll Free 1-800-359-6614 |
|||||||
|
|
|
||||||
The Snorkler is a variable speed pump that greatly reduces the time spent caulking and chinking log homes. The self-priming pump applies caulk or chink directly from a straight-sided 5-gallon bucket. The Snorkler applies a smooth and consistently even bead, creating less need for tooling. Different size nozzles are also available for almost any application. The Snorkler is made exclusively for Log Jam Chinking and Log Builder Log Sealant packed in straight-sided 5-gallon buckets. 
