Log-Gevity, Log Guard, NatureColor, NatureOne, PolyOxide
	Log-Gevity | Log Guard | NatureColor | NatureOne | NatureOne Renew | PolyOxide

	Log-Gevity™ Log Stain & Stabilizer Designed as the first step in a two-step process for use on vertical wood surfaces. Protects logs from ultraviolet radiation, water intrusion, and ultimate log/wood degradation by integrating metallic UV inhibitors, zinc borates, and water repellents within its formula. It extends color fastness while addressing certain harsh elevation and climate conditions. This is achieved by isolating certain solvent-borne wood stabilizing ingredients. These ingredients enable it to penetrate the wood to deeper levels, enabling the colorant to migrate further within the wood, which ultimately extends the life of the finish. Log Stain & Stabilizer stabilizes the wood, protecting the second semi-transparent coat. Log-Gevity™ Log Finish Coat Designed as the second step in a two-step process for use on vertical wood surfaces. It consists of several essential wood protecting ingredients blended to generate a strong adhesive bond with Log Stain & Stabilizer and reinforce the UV and moisture inhibiting attributes which maintain and protect the life of the finish. Provides an aesthetically appealing, natural looking, rich warm glow commonly associated with natural wood finishes. Unlike many film forming finishes, it is breathable and will not crack or peel. Four U.V. inhibiting ingredients provide a resilient barrier that protects against damage caused by exposure to harsh climate conditions, wind and moisture erosion, and UV radiation. Apply 3-5 years after coating with Log Stain & Stabilizer.		Log Stain & Stabilizer SPECS Application Temperature 50° F+ Coats 1 Coverage (sq. ft. per gal.) 100-400 Cleanup Soap and water or mineral spirits. PDF Data Sheet MSDS
			Cabin Gray, Chamois, Coco, Dove Gray, Forest Green, Historic Green, Pickle White, Stone Hedge, Taupe, Terra Cotta, Weathered Creosote, Weathered Gray
			Log Finish Coat SPECS Application Temperature 50° F+ Coats 1 Coverage (sq. ft. per gal.) 100-200 Cleanup Soap and water or mineral spirits. PDF Data Sheet MSDS

	Log Guard Interior Clear An advanced, water-based formulation of tested and proven latex acrylics. Manufactured in non-yellowing clear satin, Log Guard Interior Clear protects interior wood surfaces with a tough, durable, urethane-like finish that enhances the beauty of the wood. Log Guard Interior Clear was developed for use as an interior wood finish for log homes and quality interior woodwork. It has an extremely low VOC content of 60 g/l that exceeds the current regulations making it environmentally safe. In addition, it has no offensive odor usually associated with many other clear finishes.		Log Guard Interior SPECS Application Temperature 40°F to 90° F Coats 2-3 Coverage (sq. ft. per gal.) 150-500 Cleanup Soap and water. PDF Data Sheet MSDS Notes Interior use only

	NatureColor® Base Coat & Recoater A durable translucent satin wood finish for exterior wood structures. Its advanced oil alkyd resin formulation is combined with micronized ultraviolet reflecting iron oxide pigments and ultraviolet absorbers allowing beautiful grain definition, UV protection and microporosity. Applied by brush or sprayed and back brushed in a three coat system, it penetrates and bonds itself to wood surfaces in a translucent weathering shield that when properly maintained will keep your natural wood home new looking year after year. NatureColor® Base Coat is used on exterior vertical surfaces as the first and second coat of a recommended three coat system. It can also be used alone as a one or two coat application on decks, docks, railings and other weather-exposed horizontal surfaces. Apply two coats on outdoor wood furniture and fences. NatureColor® Recoater is used on vertical surfaces as a system-completing topcoat over NatureColor® Base Coat. For optimum performance all three coats should be applied within one month. If weather, budget, or time becomes an issue. NatureColor® Recoater can be applied within one year of the NatureColor® Base Coat applications. (Note: surface preparation must be followed if four weeks time has lapsed between coats). NatureColor® Recoater is also used as a subsequent single application maintenance coat to sustain your structures new wood appearance.						NatureColor SPECS Application Temperature 50°F to 90° F Coats 2 + 1 Recoater or 2 coats Base Coat. Coverage (sq. ft. per gal.) Base: 150-300 Recoater: 300-500 PDF Base: Data Sheet MSDS Recoater: Data Sheet MSDS Cleanup Mineral spirits.
					NatureColor can not be sold or shipped to: California, Connecticut, D.C., Delaware, Maine, Maryland, New Jersey, New Hampshire, New York, Pennsylvania, and the North East corner of Virginia Counties: Arlington, Fairfax, Loudoun, Prince, William, and Stafford Cities: Alexandria, Fairfax, Falls Church, Fredericksburg, Manassas, and Manassa.

	NatureOne™ 100% acrylic is an evolution in translucent coatings for exterior wood. Using the latest European acrylic resin technology and transparent iron oxides, NatureOne™ provides your outdoor wood projects with the ultimate protection available. The resin used in NatureOne™ has been successfully used in Europe in the joinery business (window and door trim) for the past ten years. The tight graining in windows and doors demands adhesion qualities of a wood coating like no other area on a wood structure. NatureOne™ applied by brush or sprayed and back brushed in a two or three coat system, penetrates and bonds itself to wood surfaces in a translucent shield that when properly maintained will keep your log home looking new year after year.				NatureOne SPECS Application Temperature 50°F to 85° F Coats 2-3 coats Coverage (sq. ft. per gal.) 150 - 500 sq. ft. per gal. Cleanup Soap and Water. PDF Data Sheet MSDS Notes: Exterior use only

	NatureOne™ Renew is a superior eco-friendly, clear exterior finish designed as a maintenance coat over existing NatureColor or NatureOne. This exterior maintenance coat will not darken or change the existing appearance of the wood surface. Only apply when you are doing a timely maintenance coat. The existing NatureColor or NatureOne protection system must be in good condition. Naturally breathable with its open film structure has excellent adhesion – specially built in adhesion promoters provide excellent initial and long term adhesion to wood substrates. Do not use on bare wood, fences or horizontal surfaces such as decks, railings or outdoor furniture. 1 gal. $76.44			NatureOne SPECS Application Temperature 50°F to 85° F Coats 1 coat Coverage (sq. ft. per gal.) 175 - 400 sq. ft. per gal. Cleanup Soap and Water. PDF Data Sheet MSDS Notes: Exterior use only over existing NatureColor or NatureOne.

	PolyOxide Wood Floor Finish Tough as a Parrot's Beak Water-based, means easy clean up. Non-flammable, non-yellowing, environmentally friendly, contains a UV protectant and is fast drying. No lingering paint smell. Use on interior wood furniture as well as wooden floors. Available in satin, semi-gloss and gloss. Quarts $26.00 1 gal. $62.00 5 gal. $275.00		PolyOxide SPECS Application Temperature 65°F to 80°F Coats 3-5 Coverage (sq. ft. per gal.) 500 Cleanup Soap and water. PDF Data Sheet MSDS

	To Place an Order: Call Toll Free 1-800-359-6614
	Prices subject to change without prior notice.
	Exterior | Interior | Decks | Furniture | Roofs		Home		More Finishes >