View More Exterior Log Finishes

Impel Rods

An effective preservative system for the prevention and control of fungi decay (rot) and many destructive insects in wood structures. When moisture contents reach levels suitable for decay (i.e. around 25%), Impel Rods slowly dissolve and begin to diffuse throughout the wood. Under 25%, the preservative becomes dormant. For restoration applications, install with an angled linear or staggered drill pattern. Wooden plugs available. Made in the U.S.A.

eF–Coat Elastomeric Foundation Coating

eF-Coat Elastomeric Foundation Coating is a new product available from the Weatherall Company. A proprietary blend of latex acrylics, eF-Coat is formulated to provide an elastomeric, resilient, stucco-like finish, with excellent weathering characteristics for above grade foundations. eF-Coat is an environmentally friendly, Engineered Green Product, with a low VOC of 30g/L. It is non-toxic/ non-hazardous and is Class 1/Class A fire rated. The cured coating is mold and mildew resistant. eF-Coat is safe for exterior as well as interior uses and has no odor when cured.

Architecturally Appealing
Unlike traditional mortar-based stucco products, eF-Coat is very flexible and can be applied to a number of substrates including concrete, concrete block, insulated concrete forms (ICF) brick, and stone. It can be troweled or sprayed on and given a variety of finishes ranging from orange peel to a smooth, steel trowel finish to a heavy knock-down. eF-Coat comes in 10 standard earth-tone color choices with custom coloring also available. This new product forms a continuous, seamless, air and water tight coating with superior adhesion. The coating provides for an excellent paintable surface for acrylic latex paints and comes in 5 gallon pails.

Easy Application
Applicators will find that this product can be applied quickly and easily. It requires only one coat with minimal prep work, is premixed – ready to use, non-cementitious and cleans up with soap and water. There is little or no maintenance. Applied with a recommended thickness of 60-80 mils, a 5 gallon pail will cover approximately 100 square feet and will be tack free in about an hour. Depending on weather conditions and the substrate, complete curing could occur within 72 hours. If using eF-Coat with concrete substrates, SCT Sealing Primer must be used to prevent the concrete surface from absorbing moisture from eF-Coat. eF-Coat Elastomeric Foundation Coating from Weatherall will help professional applicators and Do-It-Yourselfers protect and beautify their home’s foundations giving them design options that they previously did not easily and economically have. Color Swatches, Pricing, and More Information.

Weatherall Company, Inc. and Sealants & Coatings Technologies, Inc. (SCT) take pride in supplying Engineered Green Products to professional applicators, home owners and builders for 26 years. Non-hazardous and non-toxic, Weatherall and SCT give you the environmentally responsible products that you expect with the performance that you demand.